Menu
Your Cart
BLACK FRIDAY MONTH 01.11 - 30.11

Pellet Stove Parts

Brand: Micronova Model: 0000007246
The emergency console Micronova PL026 with built-in antenna can be connected to a mainboard via flat cable and allows to change some of the operation paramatres of the stove without using a remote control. Also allows monitoring the status of the stove and its alarms through the LEDs. The console..
£102.00
Brand: Micronova Model: 0000007238
Optional module for Micronova I023_5 mainboards is used in hydro models when it's necessary to enable additional controls such as: Heat exchanger Domestic Hot Water pump..
£61.00
Brand: Micronova Model: 0000007239
Optional module for micronova K023 mainboards is used in hydro models when it's necessary to enable additional controls such as: gas boiler heat exchanger servo motor control for air valve mechanical cleaner  ..
£73.00
Model: 0000006629
The K-type sensor is measuring the temperature of the pellet system's exhaust gases. This type of sensor is mainly used in pellet stoves Eco Spar with Mainboard Fumis Alpha.  ..
£14.20
Model: 0000006628
Igniter / Heating element for pellet stoves Palazzetti, Royal, MCZ, Olimpia Splendid, Pellbox, Clam, Thermorossi and others, total length 160mm, 350W
High temperature safety thermostat Alone, WK-R11 for pellet stove Eco Spar, BURNiT, etc.
The sensor of the device is installed under the hopper in pellet systems stopping the operation of the pellet stove if the temperature exceeds the safety limit of 110°C...
£31.60
Brand: Kenta Model: 0000007042
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
£81.00
Brand: Kenta Model: 0000007038
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
£84.00
Brand: Mellor Model: 0000007034
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
£139.00
Brand: Mellor Model: 0000007030
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
£139.00
Brand: Mellor Model: 0000007025
Tangential fan Fergas for pellet Superior and others with Ø60 mm, Flow 200 m³/h
Hollow-shaft pellet stove auger motor Mellor KB1014, 3RPM for Karmek One, Caminetti Montegrappa and others
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
£112.00
Model: 0000006663
Resistor for pellet stove lighting - igniter, HT62647, designed to light pellets and wood chips for stoves boilers and burners. Equivalent HT51500 - HT62264 For stoves: AMG - PIAZZETTA - ALDER - KALOR - XIANG - CALECOSOL - ECOTECK RAVELLI Mod. Lisa, Francesca, Monica (20..
£30.20
Model: 0000006667
Igniter / Heating element for pellet stoves Ecoteck, Italcalor, La Nordica, Ravelli, Sicalor and others, total length 160mm, 300W
Igniter / Heating element for pellet stove Adler, Arce, CS Thermos, Karmek One, Piazzetta, Evacalor, Superior and others, total length 150 mm, 280W
Resistor for pellet stove lighting - igniter, HT62651 - HT56124 - HT55726 designed to light pellets and wood chips for stoves boilers and burners. For stoves  PIAZZETTA - CS THERMOS - ADLER - SUPERIOR mod. Модели Cleo, Gioia, Lia, Lisa, Maira, Marcella, Mia, Mil..
£36.80
Model: 0000006668
Igniter / Heating element for pellet stove Cadel, CS Thermos, Karmek One, Ungaro, Superior and others, total length 150mm, 300W
Crossflow blower Trial, THS30B5-014 for Eco Spar pellet stoves
Heating element for pellet stove HT62652 - HT65012 designed to light pellets and wood chips for stoves boilers and burners. For stoves:  CS THERMOS - UNGARO - SUPERIOR KARMEK ONE mod. Amelia, Aquos, Barcellona, Elektra, Elena, Greta, Londra, Marylin, Parigi, ..
£36.80
Model: 0000006662
Resistor for pellet stove lighting - igniter UTXS014074 designed to light pellets and wood chips for stoves boilers and burners. For stoves RAVELLI cod. resistor 55084 - mod. Chiara - Genova - Pisa - Riviera - HR200 Ver.1-2 - HRV160 ver.1 - HRB160 - HRV135 ver.01- HRevo24 Tested for more ..
£30.30
Model: 0000006661
Resistor for pellet stove lighting - ignitеr, 1CZAJ589L, designed to light pellets and wood chips for stoves boilers and burners. For stoves: MCZ / RED cod. resistor 41451209600 MCZ mod. Swing - Swing Hydro - Flux - Flux Hydro High Efficiency - Gio' - Maggie RED mod. Compact ..
£37.00
Model: 0000006665
Resistor for pellet stove lighting - igniter, HT62649, designed to light pellets and wood chips for stoves boilers and burners. Compatible HT56135 For stoves DIELLE - PRITY- AMG - AMBIENTE E CALORE - KALON - GOOD FIRE -  CADEL mod. Erika, Slim, Titania, Adina, Aida, Cloe, Cloe 3..
£36.80
Model: 0000006698
Resistor for pellet stove lighting - igniter, HT62705, designed to light pellets and wood chips for stoves boilers and burners. Equivalent HT46073 For stoves:  ROYAL - OLSBERG LIBERA - THERMOROSSI - OLIMPIA SPLENDID - Biasi PALAZZETTI ref. 895707120 mod. Ecofire Patty - ..
£44.40
Model: 0000006695
Resistor for pellet stove lighting - igniter UTXM016013 designed to light pellets and wood chips for stoves, boilers and burners. For stoves ARCE - EUROFIAMMA Furbetta - EUROSTEACK Scintilla - CADEL Family Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£30.30
Model: 0000006677
Resistor for pellet stove lighting - igniter, HT62660 - HT62124 designed to light pellets and wood chips for stoves boilers and burners. For stoves  CT PASQUALICCHIO - ROYAL - PALAZZETTI mod. Maxi idro   Tested for more than 10,000 ON/OFF cycles,..
£36.40
Model: 0000011072
Resistor for pellet stove lighting - ignitor, HT72944 designed to light pellets and wood chips for stoves boilers and burners. Tested for more than 10,000 ON/OFF cycles, with rapid ignition times. Features: 3/8" GAS threaded connection; diameter 10mm; total length 185mm; up to scre..
£50.00
Model: 16.456.071
Resistor for pellet stove lighting - igniter, HT53640 designed to light pellets and wood chips for stoves boilers and burners. For stoves:   - CLAM Cod. 05012527 Mod. Atlas - Mizar - CLAM Cod. 05023140 Mod. Favilla F.P. 15 Tested for more than 10,000 ON/OFF cycles, wi..
£36.80
Model: 0000006697
Resistor for pellet stove lighting - igniter, HT62704, designed to light pellets and wood chips for stoves boilers and burners. For stoves:  FTB Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£30.30
Model: 0000006666
Igniter / Heating element for pellet stoves Deville, Ecoteck, Laminox, MCZ, Palazzetti, Piazzetta, Puros, Rika, RED, Ravelli, Supra, Zibro and others, total length 150 mm, 250W
Smoke extractor for pellet stoves Eco Spar, Nordica Extraflame, Palazzetti, Piazzetta, Sideros, Palladio and others fan 160m³/h 50W 300Pa
Resistor for pellet stove lighting - igniter, HT62650 , HT42056 designed to light pellets and wood chips for stoves boilers and burners. For stoves LAMINOX - ECOTECK - PALAZZETTI - PUROS - RIKA - PIAZZETTA - ZIBRO MCZ ref. 41450902600 comp. Rica 185 H/1, Athos Hydro 14kW, Athos Multi..
£36.80
Model: 0000006669
Igniter / Heating element for pellet stoves Deville, Klover, MBZ nad others, total length 153mm, 250W
Mechanical Pressure Switch Huba 605 for pellet stove Eco Spar, BURNiT, etc.
Resistor for pellet stove lighting - igniter, HT62653, designed to light pellets and wood chips for stoves boilers and burners. For stoves:  MBZ - KLOVER -DEVILLE mod. Armen, Cordouan, Faraman, Frehel, Kereon, Kereon 2, Kermorvan, Penlan, Penmen, Sambro Tested for more..
£36.80
Model: 0000006670
Igniter / Heating element for pellet stoves Deville, Lincar, LMS, Ungaro, Vibrok and others, total length 160mm, 280W
Motherboard Bertelli, PBM PB2 for pellet burner Ferroli and others
Resistor for pellet stove lighting - igniter, HT62655 vs. RICA 340 L/1 589 E/6 rif. 2044889 designed to light pellets and wood chips for stoves boilers and burners. For stoves:  LMS - UNGARO - LINCAR - VIBROK -DEVILLE mod. Ailly, Ambra Air, Isis, Onyx, Pegase, Sirius, Sti..
£36.80
Brand: Eco Spar Model: 0000006885
Igniter / Heating element for pellet stoves Eco Spar air models, Burnit and others, 3/8'' thread 300W
Tangential fan Fergas for pellet stoves Sideros, Ecoteck and others, with Ø45 mm, Flow 180 m³/h
Used for the ignition and burning of pellets in pellet stoves. Suitable for 6kw, 8kw and 10kw Ecospar air models. Burnit - Comfort PD 6kW, 8kW, 10kW ..
£28.00
Model: 0000006664
Resistor for pellet stove lighting - igniter, HT62648, designed to light pellets and wood chips for stoves boilers and burners. For stoves:  RAVELLI ref. 55045 - 55045HT - mod. 500 - 550 - 650 - 700 - 900 - 901 - Amalfi -  Arianna - Camilla - Cora - Ecovision - Elena - Ev..
£36.80
Model: 0000006701
Igniter / Heating element for pellet stoves Edilkamin and others, total length 280mm, 470W
Pellet stove auger motor Mellor FB1137, 4.75RPM for Arce, Ecoteck, Emaflam, La Nordica, Ravelli and others
Resistor for pellet stove lighting - igniter, UTXS010384 designed to light pellets and wood chips for stoves boilers and burners. For stoves  EDILKAMIN - ITALIANA CAMINI mod. ALBA MAREA 2003 / 2004 - ATENA - ARTEMIDE - ADRIANA - FOX 2 / FOX 3 Edilkamin code 207780 Equivalent to..
£40.40
Model: 0000006705
Resistor for pellet stove lighting - igniter, UTXS020198 designed to light pellets and wood chips for stoves boilers and burners. For stoves:  EDILKAMIN - ITALIANA CAMINI mod. ALBA MAREA 2003 / 2004 - ATENA - ARTEMIDE - ARIANNA - FOX 1 / FOX 2 / FOX 3 Equivalent to: UT10384 - ..
£56.00
Model: 0000006700
Igniter / Heating element for pellet stoves Edilkamin, Thermorossi and others, total length 182mm, 350W
Igniter / Heating element for pellet stoves Ecosystem and others, total length 152mm, 400W
Resistor for pellet stove lighting - igniter, UTXS026610 designed to light pellets and wood chips for stoves boilers and burners. For stoves THERMOROSSI ref. 60011795 mod. H2O 14 -  H2O 18 -  H2O 18 (2011) -  H2O 25 -  H2O 34 -  H2O 34 Restyling -  H2O 34 (2011)..
£30.30
Model: 0000006707
Kit for pellet stove cartridge resistor - igniter with resistor tube, air-canalizing tube UTXS012197 designed to light pellets, wood chips, and other lignocellulose biomasses. For stoves ENVIRO FIRE - EF2, EF3, EF4  Tested for more than 10.000 ON/OFF cycles, with rapid ignition tim..
£74.90
Model: 0000006704
Resistor for pellet stove lighting - igniter, UTXS022576 designed to light pellets and wood chips for stoves boilers and burners. For stoves:  ENVIRO FIRE - Bern, EF5 Evolution, Meridian, Windsor, EF Thermo 28 Tested for more than 10,000 ON/OFF cycles, with rapid ignition..
£43.00
Model: 0000006703
Igniter / Heating element for pellet stoves Eurofiamma, Arce and others, length 80mm, 250W
Ceramic Igniter / Heating element for pellet stoves Eco Spar, BURNiT, Ashley, Adler, AMG, Piazzetta and others, total length 102mm, 250W
Resistor for pellet stove lighting - igniter UTXS013369 designed to light pellets and wood chips for stoves, boilers and burners. For stoves EUROFIAMMA For stoves ARCE mod. Lexia, Lexia Jr, Lexia Jr Plus, Lexia Plus, Hetna Plus, Hetna Jr, Hetna Jr Plus Tested for more than 10,000 ON/OF..
£37.00
Model: 0000006675
Resistor for pellet stove lighting - igniter, HT57868, designed to light pellets and wood chips for stoves boilers and burners. For stoves GIROLAMI Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£50.40
Model: 0000006688
Vacuum motor V1J-PH22, 1200W for pellet burner BURNiT Pell and others
Igniter / Heating element for pellet stoves La Nordica, Bestove, Pasian and others, total length 155mm, 280W
Resistor for pellet stove lighting - igniter, HT62686 - extraflame 2271026 - HT42024 W260 V 230 1160263701 240316 - designed to light pellets and wood chips for stoves, boilers and burners. Compatible with HT48485 - 48485 Suitable for BESTOVE - PASIAN  For stoves:  ..
£36.80
Model: 0000006689
Resistor for pellet stove lighting - igniter, HT62687 extraflame 002271035  ( HT56785 W300 V230 1160415701 110416 ) 002271036 ( HT57514 W 300 V 230 1160421001 200416 ) edilkamin  650500 300W L154/671 ( HT54430 W 300 V 2301151296301 270116 ) designed to light pellets and wood..
£34.00
Model: 0000006687
Resistor for pellet stove lighting - igniter, HT64646, designed to light pellets and wood chips for stoves, boilers and burners. For stoves:  MONTEGRAPPA. Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£36.80
Model: 0000006672
Resistor for pellet stove lighting - igniter, HT62656, designed to light pellets and wood chips for stoves boilers and burners. For stoves OLIVIERI - LAMINOX Mod. Margherita , Valentina, Ambra, Clara, Greta, Ester, Tina, Carlotta, Victoria Tested for more than 10,000 ON/OFF cycles, w..
£36.80
Brand: Palazzetti Model: 0000006681
Igniter / Heating element for pellet stoves Palazzetti, Cadel, Thermorossi, Olimpia Splendid, total length 170mm, 350W
Igniter / Heating element for pellet stoves Palazzetti and others, total length 188mm, 350W
Resistor for pellet stove lighting - igniter UTXS025889 - UTXS020330 designed to light pellets and wood chips for stoves boilers and burners. For stoves PALAZZETTI Ref. 892606960 mod. Allegro - Ermione - Ermione A - Olga - Olga Idro 26kW - Olga Idro 26kW A - Sabina - Sabina A Tested for..
£42.30
Model: 0000006706
Igniter / Heating element for pellet stoves Palladio and others, total length 145mm, 250W
Igniter / Heating elements for pellet stoves Ecoteck, Ravelli and others, total length 114mm, 250W
Resistor for pellet stove lighting - igniter IDH63778 designed to light pellets and wood chips for stoves boilers and burners. For stoves PALLADIO Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£30.30
Model: 0000006679
Resistor for pellet stove lighting - igniter, HT62682, designed to light pellets and wood chips for stoves boilers and burners. For stoves CT PASQUALICCHIO - CLAM Cod. 05012527 Mod. Atlas - Mizar CLAM Cod. 05023140 Mod. Favilla F.P. 15 Tested for more than 10,000 ON/OFF ..
£36.40
Model: 0000006683
Igniter / Heating element for pellet stoves Prisma, LTL, Thermorossi and others, total length 188mm, 250W
Ceramic Igniter / Heating element for pellet stoves Eco Spar, BURNiT, Warmflow, Adler, AMG, Ecoteck and others, total length 88mm, 250W
Resistor for pellet stove lighting - igniter, HT62683, designed to light pellets and wood chips for stoves, boilers and burners. For stoves PRISMA - LTL - THERMOROSSI ref. 60011437 mod. Ecotherm 6000 - Ecotherm 7000 - Ecotherm 8000 - 6000 Tcom - 8000 Tcom - Inserto 60 - Insert Line..
£36.80
Model: 0000006692
Igniter / Heating element for pellet stoves Ravelli, EcoTeck, Avalon, Lopi, Breckwell and others, total length 150mm, 250W
Display Micronova, F047 for pellet stoves Eco Spar, BURNiT, Anselmo Cola, Arce, Cadel, Ecoteck, Emaflam, Euroalpi, Ferroli, Karmek One, Qlima, Ravelli and others
Resistor for pellet stove lighting - igniter, HT62702, designed to light pellets and wood chips for stoves, boilers and burners. Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
£30.30
Model: 0000006671
Resistor for pellet stove lighting - igniter, HT62654, designed to light pellets and wood chips for stoves boilers and burners. For stoves:  UNGARO - VIBROK - LINCAR Cod. 38000290 Mod. 514 - 515 - 740 - 840 - 940 - 156P Tested for more than 10,000 ON/OFF cycles, with rapid ..
£36.80
Showing 45 to 88 of 203 (5 Pages)

To ensure your pellet stove operates smoothly and lasts long, use high-quality spare parts. BalkanEnergy.CO.UK offers everything you need for maintenance and repair. Here, you will find a wide variety of:

 

Igniters / Resistors for Pellet Stoves

Igniters provide the necessary heat to ignite the pellets, ensuring a quick and easy start for the stove.

 

igniter-heatin-element-for-pellet-boiler-stoves   Igniter for Pellet Stoves

 

 

Auger Motors for Pellet Stoves

Auger Motors are responsible for feeding the pellets into the combustion chamber. They maintain a steady flow of fuel and ensure optimal combustion.

 

Pellet Stove Auger Motor Mellor   Pellet Stove Auger Motor Kenta

 

Electronics for Pellet Stoves

The electronics control all the functions of the pellet stove, from ignition to temperature regulation and fan management.

 

Display Micronova   Mainboard Micronova

 

Fans and Blowers for Pellet Stoves

The fans provide the necessary airflow for optimal pellet combustion and heat distribution.

 

Double Cross-Flow Fan   Smoke Extractor   Centrifugal Fan

 

Sensors for Pellet Stoves

The sensors monitor various parameters such as temperature, pressure, and pellet levels to ensure the safe and efficient operation of the stove.

 

Mechanical Pressure Switch   room-temperature-sensor

 

Burn Pots for Pellet Stoves

Burn pots collect residual ash from pellet combustion, making it easier to clean and maintain the stove.

 

cast-iron-burn-pot   stainless-steel-burn-pot

 

 

Frequently Asked Questions about Pellet Stoves Parts

 

  1. How do I choose the right igniter for my pellet stove?
    Choose an igniter based on the model and power of your stove. Check the manufacturer's instructions for compatibility.
  2. How often should I replace the igniter in my pellet stove?
    It depends on the frequency of use. On average, the igniter should be replaced every 1-2 years.
  3. How do I maintain the auger motor in my pellet stove?
    Regularly check it for wear and lubricate it according to the manufacturer's instructions.
  4. What problems might arise with the electronics of a pellet stove?
    The most common issues are related to malfunctioning control panels, sensors, or circuit boards.
  5. How do I maintain the fan in my pellet stove?
    Cleaning the fan of dust and other debris is sufficient to keep it working efficiently.
  6. How do I check if the sensors in my pellet stove are working properly?
    Use the diagnostic functions on the control panel or specialized software.
  7. How often should I empty the ashtray in my pellet stove?
    Empty the ashtray regularly, usually once a week or as recommended by the manufacturer.
  8. What are the signs of a faulty auger motor?
    Signs include noise during operation, irregular pellet feeding, or complete lack of movement.
  9. What should I do if the pellet stove doesn’t ignite?
    Check the igniter, electrical connections, and the availability of pellets.
  10. How long does a fan in a pellet stove typically last?
    The average lifespan is 3-5 years, depending on the intensity of use.