Pellet Stove Parts
Capillary thermostat with manual reset, operates with a remote probe.
The probe has a diameter of 6.5 mm and a length of 80 mm, and the capillary tube is 1.0 m long.
The thermostat can be adjusted from 90°C to 110°C...
£24.98
REFLECTOR for cast iron burn pot suitable for pellet stoves Eco Spar.
Compatible with the cast iron burn pot of the following models:
Alba 18kW
Alba 18kW B-model
Auriga 25kW
Auriga 25kW B-model
MINIMA 12kW
MINIMA 12kW B-model
Karina 10kW..
£4.11
Cast iron burn pot suitable for Eco Spar pellet stoves.
Compatible with the following models:
Alba 18kW
Alba 18kW B-model
Auriga 25kW
Auriga 25kW B-model..
£35.98
Cast iron burn pot for ash suitable for Eco Spar pellet stoves.
Compatible with the following model:
Eco Spar MINIMA 12 kW with water jacket..
£35.98
Display for connection with Tiemme control boards for pellet stoves...
£42.33
Encoder for pellet stove fan, compatible with the brand BURNiT...
£13.55
It is used to connect the display to the control board of pellet burners...
£8.57
Exhaust gas temperature sensor for the pellet stove system.
Temperature sensor for smoke made from AISI 316 stainless steel with a VETROTEX fiberglass cable. Type-K thermocouple smoke sensor provides information on the measured smoke temperature for the devices where it is installed.
The Type-..
£16.93
Igniter with 3/8" thread.
Dimensions:
Overall length: 170mm
Length to the thread: 160mm
Diameter: 9.5mm
Power: 300W..
£29.63
Igniter for pellet stoves with 3/8 thread.
Dimensions:
Overall length - 163 mm
Length to flange - 150 mm
Diameter - 9.5 mm
Power - 250 W..
£42.33
Lid for cast iron burn pot for pellet stoves Eco Spar Hydro Mod 2..
£12.70
This auger motor is also compatible with EcoSpar models (older models) using MICRONOVA control...
£71.96
Designed to supply electric power to pellet burners and boilers...
£3.81
The temperature probe measures the temperature of the room where the appliance is placed.
For pellet stoves:
BURNiT
CADEL models: Adina - Erica - Miki - Luna - Slim - Titania - Wall
CADEL models: Aquos 15 - Aquos 22 - Aquos 22/S - Ibis 11 KW - Ibis 15 KW - Ibis 22 KW - Ib..
£16.93
The temperature probe measures the air temperature in the room where the appliance is placed.
Capsule dimensions: 6x30 mm.
For stoves:
Eco Spar and BURNiT
EdilKamin Blade..
£16.93
Designed for a maximum airflow range of up to 185 m³/h.
No Hall effect sensor (Encoder)...
£84.66
Smoke extractor fan compatible with BURNiT pellet stoves...
£71.96
The sensor measures the water temperature in the back boiler of the pellet stove and allows it to be controlled accordingly...
£16.93
To ensure your pellet stove operates smoothly and lasts long, use high-quality spare parts. BalkanEnergy.CO.UK offers everything you need for maintenance and repair. Here, you will find a wide variety of:
Igniters / Resistors for Pellet Stoves
Igniters provide the necessary heat to ignite the pellets, ensuring a quick and easy start for the stove.
Auger Motors for Pellet Stoves
Auger Motors are responsible for feeding the pellets into the combustion chamber. They maintain a steady flow of fuel and ensure optimal combustion.
Electronics for Pellet Stoves
The electronics control all the functions of the pellet stove, from ignition to temperature regulation and fan management.
Fans and Blowers for Pellet Stoves
The fans provide the necessary airflow for optimal pellet combustion and heat distribution.
Sensors for Pellet Stoves
The sensors monitor various parameters such as temperature, pressure, and pellet levels to ensure the safe and efficient operation of the stove.
Burn Pots for Pellet Stoves
Burn pots collect residual ash from pellet combustion, making it easier to clean and maintain the stove.
Frequently Asked Questions about Pellet Stoves Parts
- How do I choose the right igniter for my pellet stove?
Choose an igniter based on the model and power of your stove. Check the manufacturer's instructions for compatibility. - How often should I replace the igniter in my pellet stove?
It depends on the frequency of use. On average, the igniter should be replaced every 1-2 years. - How do I maintain the auger motor in my pellet stove?
Regularly check it for wear and lubricate it according to the manufacturer's instructions. - What problems might arise with the electronics of a pellet stove?
The most common issues are related to malfunctioning control panels, sensors, or circuit boards. - How do I maintain the fan in my pellet stove?
Cleaning the fan of dust and other debris is sufficient to keep it working efficiently. - How do I check if the sensors in my pellet stove are working properly?
Use the diagnostic functions on the control panel or specialized software. - How often should I empty the ashtray in my pellet stove?
Empty the ashtray regularly, usually once a week or as recommended by the manufacturer. - What are the signs of a faulty auger motor?
Signs include noise during operation, irregular pellet feeding, or complete lack of movement. - What should I do if the pellet stove doesn’t ignite?
Check the igniter, electrical connections, and the availability of pellets. - How long does a fan in a pellet stove typically last?
The average lifespan is 3-5 years, depending on the intensity of use.